f6. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN
CODE 32 AND ANY SUB CODE
KNOWN INFO
Fuse OK.
Batteries OK.
POSSIBLE PROBLEMS
Faulty WTEC II cab
transmission harness.
Faulty WTEC II TEPSS.
Replace WTEC II cab transmission
harness (para 7-86).
YES
NO
TEST OPTIONS
Continuity Test or STE/ICE-R
Test #91
REASON FOR QUESTION
If continuity is not present
from connector J119j to
connector J115-27, or
continuity is present from J119j
to any other J115 sockets or
ground, WTEC II cab
transmission harness is faulty.
1.
Is continuity present from
connector J119h and J119j
to connector J115-27 and
J115-28?
CAUTION
Read CAUTION
on following page.
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Multimeter, Digital (Item 22, Appendix C)
Tools and Special Tools (Cont)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Wrench Set, Socket (Item 49, Appendix C)
STE/ICE-R (Item 39, Appendix C)
References
TM 9-4910-571-12&P
START
TM 9-2320-365-20-2
2-1396 Change 1
