Replace WTEC III cab transmission harness (para 7-87). YES NO 1. Is continuity present from connector J119j to connector P114-12 and absent from J119j to all other P114 sockets and ground? CAUTION Read CAUTION on following page.            TEST OPTIONS            Continuity Test or STE/ICE-R Test #91     REASON FOR QUESTION     If continuity is not present from connector J119j to connector P114-12, or continuity is present from J119j to any other P114 sockets or ground, WTEC III cab transmission harness is faulty.             KNOWN INFO              Fuse OK. Batteries OK.        POSSIBLE PROBLEMS        Faulty WTEC III cab transmission harness. Faulty WTEC III transmission ECU. Tools and Special Tools   Wrench Set, Socket (Item 49, Appendix C)   STE/ICE-R (Item 39, Appendix C) References   TM 9-4910-571-12&P INITIAL SETUP   Equipment Conditions      Engine shut down (TM 9-2320-365-10).   Tools and Special Tools      Tool Kit, Genl Mech (Item 44, Appendix C)      Multimeter, Digital (Item 22, Appendix C)      Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) START 2-1516          Change 1 TM 9-2320-365-20-2 f26. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE        32 AND ANY SUB CODE