TM 9-2320-365-20-22-1109CONTINUITY TEST(1) Remove six screws and cover from 110/208VAC POWER DISTRIBUTION PANEL.(2) Remove circuit breaker CB6 from 110/208VAC POWER DISTRIBUTION PANEL.(3) Position circuit breaker CB6 to ON.(4) Set multimeter to ohms.(5) Connect positive (+) probe of multimeter tooutput terminal of circuit breaker CB6.(6) Connect negative (-) probe of multimeter toinput terminal of circuit breaker CB6 and notereading on multimeter.(7) If continuity is not present, replace circuitbreaker CB6 (para 16-64).(8) Install circuit breaker CB6 on 110/208 VACPOWER DISTRIBUTION PANEL.
