TM 9-2320-365-20-2
2-1113
CONTINUITY TEST
(1) Remove two screws and cover from INTERIOR
LIGHTS switch S32 outlet box.
(2) Set multimeter to ohms.
(3) Connect positive (+) probe of multimeter to
K41 relay base terminal 6.
(4) Connect negative (-) probe of multimeter to
top left pole of INTERIOR LIGHTS switch
S32 and note reading on multimeter.
(5) If continuity is not present, repair or replace
wire 706C (para 2-40).
(6) Close cover on relay box assembly.
(7) Tighten screw in cover.
