TM 9-2320-365-20-2
CONTINUITY TEST
(1) Remove kick panel (para 16-3).
(2) Disconnect connector P110 from CTIS ECU.
(3) Disconnect connector P111 from connector
J111.
(4) Set multimeter to ohms.
(5) Connect positive (+) probe of multimeter to
connector P110U.
(6) Connect negative (-) probe of multimeter to
connector P111B and note reading on
multimeter.
(7) If continuity is not present, repair wire 1528
(para 2-40) or replace CTIS cable assembly
(para 7-53).
2-1877
