TM 9-2320-365-20-2
2-1893/(2-1894 Blank)
CONTINUITY TEST
(5) If continuity is not present, repair wire 1528
(para 2-40) or replace CTIS cable assembly
(para 7-53).
(6) If continuity is present, replace CTIS ECU
(para 12-6).
(7) Connect connector P110 to CTIS ECU.
(8) Connect connector P111 to connector J111.
(9) Install kick panel (para 16-3).
(1) Disconnect connector P110 from CTIS ECU.
(2) Set multimeter to ohms.
(3) Connect positive (+) probe of multimeter to
connector P111D.
(4) Connect negative (-) probe of multimeter to
connector P110E and note reading on
multimeter.
