TM 9-2320-365-20-3
(5) Loosen two jam nuts (8) behind ball seats (2 and 6).
(6) Remove ball seats (2 and 6) and two jam nuts (8) from
threaded rod (3).
b. Installation.
(1) Install two jam nuts (1) to bottom of threads on threaded
rod (2).
(2) Install ball seats (3 and 4) on threaded rod (2) until ball
seats contact two jam nuts (1).
(3) Tighten two jam nuts (1) against ball seats (3 and 4).
(4) Apply grease to inside of ball seat (3).
(5) Install ball seat (3) in accelerator pedal (5).
(6) Install clip ring (6) on ball seat (3).
4-97
