TM 9-2320-365-20-3
4-20. THROTTLE CONTROL LEVER REPLACEMENT (CONT)
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(8) Remove retaining ring (5) and lever (6) from lever stud
(7).
(9) Remove bushing (8) from lever stud (7).
(10) Remove clip (9) and throttle control cable (10) from stud
(11).
(11) Remove nut (12), spring washer (13), and ball stud (4)
from lever (6). Discard spring washer.
b. Installation.
(1) Install ball stud (1) on lever (2) with spring washer (3)
and nut (4).
(2) Install throttle control cable (5) on stud (6) with clip (7).
4-100
