TM 9-2320-365-20-3
7-4. ALTERNATOR BRACKETS REPLACEMENT (CONT)
WARNING
Adhesive
Sealant
MIL-S-46163
can
damage your eyes. Wear safety goggles
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention. Failure to comply may result in
injury to personnel.
(3) Apply sealing compound to threads of three screws (4)
and stud (5).
(4) Position alternator bracket (6) on thermostat housing (7)
with three screws (4).
(5) Install self-locking nut (8) on stud (5).
(6) Tighten three screws (4) to 18-22 lb-ft (24-30 N·m).
(7) Position two washers (9) and screws (10) in alternator bracket (6).
(8) Tighten two screws (10) to 121-147 lb-ft (164-200 N·m).
(9) Position belt adjusting arm (11) on alternator bracket (6)
with two washers (12) and screws (13).
(10) Tighten two screws (13) to 18-22 lb-ft (24-30 N·m).
7-14