TM 9-2320-365-20-3
7-7. STARTING MOTOR REPLACEMENT
This task covers:
a. Deleted
b. Removal
c. Installation
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Cab raised (TM 9-2320-365-10).
Batteries disconnected (para 7-48).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Sling, Endless (Item 32, Appendix C)
Wrench Set, Socket (Item 49, Appendix C)
Socket Set, Socket Wrench (Item 35, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Adapter, Socket Wrench (Item 2, Appendix B)
Heater, Gun Type, Electric (Item 20, Appendix B)
Crowfoot Attachment, Socket Wrench (Item 9, Appendix
B)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Adhesive (Item 8, Appendix D)
Adhesive (Item 10, Appendix D)
Bolt, Machine (3) (Item 2, Appendix G)
Gasket (Item 40, Appendix G)
Splice, Conductor (Item 261, Appendix G)
Tape, Insulation, Electrical (Item 75, Appendix
D)
Insulation, Sleeving, Electrical (Item 30.1,
Appendix D)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Deleted.
b. Removal.
NOTE
Tag wires and connection points prior to
disconnecting.
(1) Remove adhesive, nut (1), terminal lugs TL55 (2) and
TL12 (3) from solenoid terminal (4).
(2) Position nut (1) on solenoid terminal (4).
(3) Remove adhesive, nut (5), and terminal lug TL26 (6)
from solenoid terminal (7).
(4) Position nut (5) on solenoid terminal (7).
Change 1
7-25
