TM 9-2320-365-20-3
7-20. STARTER PUSHBUTTON SWITCH REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Instrument panel assembly removed for access (para 7-
15).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
a. Removal.
NOTE
Tag wires and connection points prior to
disconnecting.
(1) Disconnect terminal lugs TL162 (1) and TL163 (2) from
starter pushbutton switch (3).
(2) Remove nut (4), washer (5), and starter pushbutton
switch (3) from instrument panel assembly (6).
b. Installation.
(1) Position starter pushbutton switch (3) in instrument panel
assembly (6) with washer (5) and nut (4).
(2) Tighten nut (4) to 57-70 lb-in. (6-8 N·m).
(3) Connect terminal lugs TL163 (2) and TL162 (1) to starter
pushbutton switch (3).
c. Follow-On Maintenance.
(1) Install instrument panel assembly (para 7-15).
(2) Start engine (TM 9-2320-365-10).
(3) Shut down engine (TM 9-2320-365-10).
End of Task.
7-116
