TM 9-2320-365-20-3
7-30. BLACKOUT DRIVE LIGHT REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-48).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Materials/Parts
Lockwasher (Item 92, Appendix G)
Packing, Preformed (Item 168, Appendix G)
a. Removal.
(1) Disconnect connector P17 (1) from blackout drive light
(2).
(2) Remove nut (3), lockwasher (4), washer (5), washer (6),
and terminal lug TL79 (7) from blackout drive light (2).
Discard lockwasher.
(3) Remove blackout drive light (2) from bumper (8).
b. Disassembly.
(1) Loosen three screws (1) on cover (2).
(2) Remove cover (2) and preformed packing (3) from
housing (4). Discard preformed packing.
(3) Remove lamp (5) from socket (6).
7-141
