TM 9-2320-365-20-3
7-29. BACKUP LIGHT ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-48).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Materials/Parts
Lockwasher (2) (Item 92, Appendix G)
Packing, Preformed (Item 192, Appendix G)
a. Removal.
(1) Disconnect backup light connector (1) from connector
P87 (2).
(2) Remove two screws (3), lockwashers (4), terminal lug
TL17 (5), and backup light assembly (6) from taillight
carrier (7). Discard lockwashers.
b. Disassembly.
(1) Loosen six screws (1) on lens (2).
(2) Remove lens (2) from housing (3).
(3) Remove preformed packing (4) from housing (3).
Discard preformed packing.
(4) Remove two lamps (5) from sockets (6).
7-139