TM 9-2320-365-20-3
7-45. BATTERY TESTER REPLACEMENT (CONT)
b. Installation.
(1) Install spring clip (1) on battery hold-down bracket (2)
with two screws (3).
(2) Install battery tester (4) in spring clip (1).
(3) Install clamp (5) on battery hold-down bracket (2) with
screw (6).
WARNING
Negative battery terminals must be
connected last. Failure to comply may
result in serious injury or death to
personnel.
(4) Install battery tester terminal lug (7) and terminal lug
TL49A (8) on battery 24 VDC cable (9).
NOTE
Perform step (5) on vehicles equipped with
cargo arctic heater.
(5) Install terminal lug TL1 (10) on battery 24 VDC cable (9).
(6) Install nut (11) on battery 24 VDC cable (9).
7-186
