TM 9-2320-365-20-3
b. Installation.
NOTE
Install plastic cable ties as required.
(1) Position M1079 12/24 vdc power cable (1) on vehicle.
NOTE
Perform steps (2) through (4) on vehicles
equipped with 200 amp alternator.
(2) Position terminal lugs TL100 (2) and TL44 (3) on
terminal block terminal (4) with washer (5), lockwasher
(6), and nut (7).
(3) Tighten nut (7) to 15-19 lb-ft (21-25 N·m).
(4) Position dust boot (8) on terminal lug TL44 (3).
NOTE
Perform steps (5) and (6) on vehicles
equipped with 100 amp alternator.
(5) Install terminal lugs TL100 (2) and TL44 (3) on 100 amp
reverse polarity relay (9) with lockwasher (10) and nut
(11).
(6) Position dust boot (8) on terminal lug TL44 (3).
7-213
