TM 9-2320-365-20-3
7-71. CAB TO CHASSIS GROUND STRAP REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-48).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 35, Appendix C)
Materials/Parts
Ties, Cable, Plastic (Item 76, Appendix D)
Nut, Self-Locking (Item 148, Appendix G)
Lockwasher (Item 70, Appendix G)
a. Removal.
NOTE
Remove plastic cable ties as required.
(1) Remove two screws (1) and washers (2) from front grille
(3).
(2) Remove screw (4) and washer (5) from front grille (3).
(3) Remove front grille (3) from cab (6).
(4) Loosen screw (7) in chassis (8) and remove cab to
chassis ground cable (9).
(5) Remove self-locking nut (10), washer (11), cab to
chassis ground cable (9), and lockwasher (12) from stud
(13). Discard self-locking nut and lockwasher.
7-278
Change 1