TM 9-2320-365-20-3
b. Installation.
(1) Install cab to chassis ground cable (1) on stud (2) with
lockwasher (3), washer (4), and self-locking nut (5).
(2) Install cab to chassis ground cable (1) on chassis (6)
with screw (7).
(3) Position front grille (8) on cab (9) with washer (10) and
screw (11).
(4) Position two washers (12) and screws (13) in front grille
(8).
(5) Tighten screw (11) to 48-60 lb-in. (5-7 N•m).
(6) Tighten two screws (13) to 24 lb-in. (3 N•m).
c. Follow-On Maintenance
(1) Connect batteries (para 7-48).
(2) Start engine (TM 9-2320-365-10).
(3) Check VOLTS gage for charge indication (TM 9-2320-
365-10).
(4) Shut down engine (TM 9-2320-365-10).
End of Task.
7-279
