TM 9-2320-365-20-3
7-74. FRONT LIGHTS CABLE ASSEMBLY REPLACEMENT (CONT)
(14) Disconnect connector P17 (37) from blackout drive light
(38).
(15) Remove nut (39), lockwasher (40), and terminal lug TL72
(41) from blackout drive light (38). Discard lockwasher.
(16) Disconnect connector P52F (42) from connector J52
(43).
NOTE
Perform step (16.1) on vehicle serial number
7448 and higher and vehicle serial numbers
0001 through 7447 that have previously had
front lights cable assembly replaced.
(16.1) Remove adhesive and boot (43.1) from low pressure
transmitter (44).
(17) Remove adhesive, two nuts (45), lockwashers (46), and
terminal lugs TL201 (47) and TL202 (48) from low
pressure transmitter (44). Discard lockwashers.
7-294
Change 1
