TM 9-2320-365-20-3
(7) Disconnect connector P87 (25) from backup light
connector (26).
(8) Remove two screws (27), lockwashers (28), backup light
(29), and terminal lug TL17 (30) from LH taillight carrier
(4). Discard lockwashers.
(9) Pull rear lights cable assembly (5) through left frame rail
(31).
NOTE
Perform steps (10) and (11) on vehicles
equipped with SRW.
(10) Remove self-locking nut (47), clamp (48), and screw (49)
from RH taillight carrier (50). Discard self-locking nut.
(11) Remove clamp (48) from rear lights cable assembly (5).
NOTE
Perform steps (12) and (13) on vehicles not
equipped with SRW.
(12) Remove two self-locking nuts (47), clamps (48), and
screws (49) from RH taillight carrier (50). Discard self-
locking nuts.
(13) Remove two clamps (48) from rear lights cable assembly
(5).
Change 1
7-305