TM 9-2320-365-20-3
7-75. REAR LIGHTS CABLE ASSEMBLY REPLACEMENT (CONT)
NOTE
Steps (29) through (31) require the aid of an
assistant.
(29) Position rear lights cable assembly (1) in two clamps
(34).
(30) Position two clamps (34) on right frame rail (5) with two
screws (35) and self-locking nuts (36).
(31) Tighten two self-locking nuts (36) to 84-108 lb-in. (10-12
N·m).
(32) Position rear lights cable assembly (1) in clamp (37).
(33) Position clamp (37) on bracket (38) with screw (39) and
self-locking nut (40).
(34) Tighten self-locking nut (40) to 84-108 lb-in. (10-12 N·m).
NOTE
Steps (35) through (37) require the aid of an
assistant.
(35) Position rear lights cable assembly (1) in clamp (41).
(36) Position clamp (41) and terminal lug TL92 (42) on right
frame rail stud (43) with self-locking nut (44).
(37) Tighten self-locking nut (44) to 84-108 lb-in. (10-12 N·m).
7-316
Change 1