TM 9-2320-365-20-3
7-75. REAR LIGHTS CABLE ASSEMBLY REPLACEMENT (CONT)
NOTE
Perform steps (54) through (56) on vehicles
equipped with SRW.
(54) Install rear lights cable assembly (1) in clamp (89).
(55) Position screw (90) and clamp (89) on RH taillight carrier
(71) with self-locking nut (91).
(56) Tighten self-locking nut (91) to 84-108 lb-in. (10-12 N·m).
NOTE
Perform steps (57) through (59) on vehicles
not equipped with SRW.
(57) Install rear lights cable assembly (1) in two clamps (89).
(58) Position two screws (90) and clamps (89) on RH taillight
carrier (71) with two self-locking nuts (91).
(59) Tighten two self-locking nuts (91) to 84-108 lb-in. (10-12
N·m).
(60) Route rear lights cable assembly (1) through left frame
rail (51).
(61) Install terminal lug TL17 (107) and backup light (108) on
LH taillight carrier (109) with two lockwashers (110) and
screws (111).
(62) Connect connector P87 (112) to backup light connector
(113).
7-316.4
Change 1