TM 9-2320-365-20-3
7-76. POWER DISTRIBUTION PANEL (PDP) TO CAB GROUND CABLE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-48).
PDP cover removed (para 16-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Materials/Parts
Ties, Cable, Plastic (Item 76, Appendix D)
Lockwasher (Item 73, Appendix G)
Lockwasher (Item 74, Appendix G)
a. Removal
(1) Remove three screws (1) and washers (2) from PDP (3).
(2) Remove three screws (4) from PDP (3).
(3) Lift PDP (3) outward to gain access.
NOTE
Remove plastic cable ties as required.
(4) Remove screw (5), lockwasher (6), terminal lug TL56 (7),
and wire 1623 (8) from PDP (3). Discard lockwasher.
(5) Remove nut (9), lockwasher (10), and terminal lug TL57
(11) from grounding stud (12). Discard lockwasher.
(6) Remove PDP to cab ground cable (13) from vehicle.
7-319
