TM 9-2320-365-20-3
7-77. POWER TAKE-OFF (PTO) CABLE ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-63).
Kick panel removed (para 16-3).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 35, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Ties, Cable, Plastic (Item 76, Appendix D)
Nut, Self-Locking (5) (Item 134, Appendix G)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
• Tag connectors and connection points prior to
disconnecting.
• Remove plastic cable ties as required.
(1) Disconnect connector P217 (1) from PTO solenoid
connector (2).
(2) Disconnect connector P216 (3) from PTO pressure
switch connector (4).
7-321
