TM 9-2320-365-20-3
(12) Position intake air cleaner boot (22) on intake air cleaner
housing (23) with clamp (24).
(13) Position air compressor intake hose (25) on intake air
cleaner boot (22) with clamp (26).
(14) Tighten clamps (24 and 26) to 36-48 lb-in. (4-5 N·m).
(15) Lower cab (TM 9-2320-365-10).
(16) Remove screw (27) from PDP (28).
(17) Position four terminal lugs (29) and terminal lug TL42
(30) on PDP (28) with lockwasher (31) and screw (27).
(18) Tighten screw (27) to 35-45 lb-in. (4-5 N·m).
(19) Install PDP (28) on dashboard (32) with three screws
(33).
(20) Install three washers (34) and screws (35) in PDP (28).
7-341