TM 9-2320-365-20-3
7-82. START AND CHARGING CABLE ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Spare tire lowered (TM 9-2320-365-10).
Batteries disconnected (para 7-48).
Instrument panel assembly removed for access (para
7-15).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Heater, Gun Type, Electric (Item 20, Appendix B)
Materials/Parts
Ties, Cable, Plastic (Item 76, Appendix D)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Nut, Self-Locking (7) (Item 116, Appendix G)
Nut, Self-Locking (Item 134, Appendix G)
Nut, Self-Locking (Item 137, Appendix G)
Lockwasher (Item 92, Appendix G)
Lockwasher (3) (Item 78, Appendix G)
Lockwasher (2) (Item 82, Appendix G)
Adhesive (Item 8, Appendix D)
Splice, Conductor (Item 261, Appendix G)
Tape, Insulation, Electrical (Item 75, Appendix
D)
Insulation, Sleeving, Electrical (Item 30.1,
Appendix G)
Personnel Required
(2)
a. Removal.
NOTE
• Remove plastic cable ties as required.
• Tag connectors and connection points prior to
disconnecting.
(1) Disconnect connector P43 (1) from connector J43 (2).
(2) Position connector P43 (1) through bottom of dashboard
(3).
(3) Disconnect connector P43X (4) from connector J43X (5).
(4) Position connector P43X (4) through side of dashboard
(3).
Change 1
7-343
