TM 9-2320-365-20-3
(9) Remove four nuts (14), washers (15), and screws (16)
from 11K SRW control valve bracket (17).
(10) Move 11K SRW control valve (18) away from right frame
rail (13).
(11) Loosen two captive screws (19) and remove connectors
L4 (20) and L5 (21) from 11K SRW control valve (18).
(12) Remove winch control valve cable assembly (9) from
vehicle.
b. Installation
NOTE
Install plastic cable ties as required.
(1) Position winch control valve cable assembly (1) on
vehicle.
(2) Install connectors L4 (2) and L5 (3) on 11K SRW control
valve (4).
(3) Tighten two captive screws (5) in connectors L4 (2) and
L5 (3).
(4) Position 11K SRW control valve (4) on right frame rail
(6).
(5) Position four washers (7), screws (8), and nuts (9) in
11K SRW control valve bracket (10).
(6) Tighten four nuts (9) to 18-22 lb-ft (24-29 N·m).
Change 1
7-367
