TM 9-2320-365-20-3
7-86. WTEC II CAB TRANSMISSION HARNESS REPLACEMENT (CONT)
(9) Disconnect connector P119 (16) from connector J119
(17).
NOTE
Step (10) requires the aid of an assistant.
(10) Remove four nuts (18), lockwashers (19), screws (20),
gasket (21), and connector J119 (17) from cab (22).
Discard lockwashers and gasket.
CAUTION
Cab transmission harness connectors are
easily damaged.
Use care when routing
harness through dashboard.
Failure to
comply may result in damage to equipment.
(11) Remove WTEC II cab transmission harness (15) from
dashboard (11).
7-372
