TM 9-2320-365-20-3
b. Installation.
CAUTION
Cab transmission harness connectors are
easily damaged. Use care when routing
harness through dashboard.
Failure to
comply may result in damage to equipment.
NOTE
If replacing WTEC II cab transmission
harness with WTEC III cab transmission
harness, perform para 8-8.
(1) Route cab transmission harness (1) inside dashboard
(2).
WARNING
Ensure WTEC II cab transmission harness
does not interfere with throttle linkage.
Failure to comply may result in injury to
personnel.
NOTE
Step (2) requires the aid of an assistant.
(2) Install gasket (3) and connector J119 (4) on cab (5) with
four screws (6), lockwashers (7), and nuts (8).
7-373
