TM 9-2320-365-20-3
4-6. FUEL RATIO CONTROL TUBE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Materials/Parts
Packing, Preformed (2) (Item 183, Appendix G)
Packing, Preformed (2) (Item 181, Appendix G)
WARNING
Diesel fuel is flammable. If fuel is spilled,
clean it up immediately. Failure to comply
may result in serious injury or death to
personnel.
a. Removal.
(1) Remove screw (1), washer (2), and loop clamp (3) from
pressure regulating orifice (4).
(2) Disconnect fuel ratio control tube (5) from adapter (6).
(3) Remove preformed packing (7) from adapter (6).
Discard preformed packing.
(4) Remove adapter (6) from inlet manifold (8).
(5) Remove preformed packing (9) from adapter (6). Discard
preformed packing.
4-37