TM 9-2320-365-20-3
4-8. FUEL TANK AND BRACKETS REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-48).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Container (60 Gal (227 L) capacity)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Wrench, Torque, 0-600 lb-ft (Item 59, Appendix C)
Socket Set, Impact (Item 33, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Materials/Parts
Rag, Wiping (Item 51, Appendix D)
Ties, Cable, Plastic (Item 76, Appendix D)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Packing, Preformed (Item 193, Appendix G)
Sealing Compound (Item 61, Appendix D)
Primer, Sealing Compound (Item 50, Appendix
D)
Nut, Self-Locking (2) (Item 140, Appendix G)
Nut, Self-Locking (8) (Item 144, Appendix G)
Personnel Required
(2)
WARNING
Diesel fuel is flammable. If fuel is spilled,
clean it up immediately. Failure to comply
may result in serious injury or death to
personnel.
a. Removal.
NOTE
Remove plastic cable ties as required.
(1) Disconnect connector clamp (1) from fuel level sending
unit connector (2).
(2) Disconnect fuel level sending unit connector (2) from
connector P82 (3).
(3) Position container under fuel tank (4).
(4) Remove drain plug (5) from fuel tank (4) and drain fuel.
4-42
Change 1
