TM 9-2320-365-20-3
8-10. TRANSMISSION OIL COOLER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Container (60 qt (57 L) capacity)
Pan, Drain (Item 24, Appendix C)
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-75 lb-in. (Item 86, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix B)
Crowfoot Attachment, Socket Wrench (Item 12.1,
Appendix B)
Materials/Parts
Antifreeze, Ethylene Glycol, Permanent (Item 13,
Appendix D)
Packing, Preformed (4) (Item 158, Appendix G)
Packing, Preformed (2) (Item 158.1, Appendix G)
Nut, Self-Locking (Item 122.1, Appendix G)
Personnel Required
(2)
WARNING
• Wear appropriate eye protection when
working under vehicle due to the possibility
of falling debris.
Failure to comply may
result in injury to personnel.
• Ensure exhaust system is cool before
performing maintenance. Failure to comply
may result in injury to personnel.
a. Removal.
(1) Position container under radiator (1).
(2) Remove radiator cap (2) from radiator overflow tank (3).
(3) Open radiator draincock (4) and drain coolant.
(4) Close radiator draincock (4).
8-38
Change 1
