TM 9-2320-365-20-3
8-11. TRANSMISSION OIL COOLER TUBES REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Pan, Drain (Item 24, Appendix C)
Crowfoot Attachment, Socket Wrench (Item 12.1,
Appendix B)
Tools and Special Tools (Cont)
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Materials/Parts
Packing, Preformed (2) (Item 165, Appendix G)
Packing, Preformed (Item 158.2, Appendix G)
WARNING
• Wear appropriate eye protection when
working under vehicle due to the possibility
of falling debris.
Failure to comply may
result in injury to personnel.
• Ensure exhaust system is cool before
performing maintenance. Failure to comply
may result in injury to personnel.
a. Removal.
(1) Position drain pan under transmission oil cooler tube (1).
(2) Disconnect transmission oil cooler tube (1) from 90-
degree fitting (2).
NOTE
Transmission oil cooler tube must exit from
rear of vehicle.
(3) Remove transmission oil cooler tube (1) from
transmission oil cooler (3).
Change 1
8-43
