TM 9-2320-365-20-3
8-12. TRANSMISSION SCAVENGE PUMP HOSE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Exhaust pipe removed (para 5-3).
Transmission oil cooler tube removed, if equipped
(para 8-11).
Transmission oil cooler hose removed, if equipped
(para 8-15).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Tools and Special Tools (Cont)
Pan, Drain (Item 24, Appendix C)
Materials/Parts
Filter Element, Fluid (Item 15, Appendix G)
Packing, Preformed (2) (Item 175, Appendix G)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. Removal.
(1) Position drain pan under back end of scavenge pump
hose (1).
(2) Disconnect scavenge pump hose (1) from 45-degree
fitting (2).
(3) Remove scavenge pump hose (1) from fitting (3).
Change 1
8-47
