TM 9-2320-365-20-3
11-8. REAR BRAKE AIR CHAMBER REPLACEMENT (CONT)
(13) Install collet nut (9) on rear air chamber (10) to bottom
of threads.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury to personnel.
(14) Apply sealing compound to threads of rear air chamber
(10).
WARNING
Ensure rear air chamber is caged prior
to installation. Failure to comply may
result in injury to personnel.
(15) Install rear air chamber (10) in plunger housing (11)
until it bottoms.
CAUTION
Loosen rear air chamber no more than
one full turn. Failure to comply may result
in damage to equipment.
(16) Tighten collet nut (9) against plunger housing (11).
NOTE
Clean fittings and rear air chamber of all
sealing compound residue prior to
installation.
(17) Apply sealing compound to threads of adapter (12).
(18) Install adapter (12) in rear air chamber (10).
(19) Apply sealing compound to tee fittings (13, 14, and 15).
(20) Install tee fittings (13 and 14) in rear air chamber (10).
(21) Install tee fitting (15) in adapter (12).
11-42
