TM 9-2320-365-20-3
11-19. BRAKE AIR HOSES REPLACEMENT
This task covers:
a. Brake Air Hose Locations
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Air tanks drained (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Materials/Parts
Cap and Plug Set (Item 15, Appendix D)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Ties, Cable, Plastic (Item 76, Appendix D)
a. Brake Air Hose Locations
WARNING
Wear appropriate eye protection when working under vehicle due to the possibility of
falling debris. Failure to comply may result in injury to personnel.
CAUTION
Cap or plug hose connections to prevent contamination. Failure to comply may result in damage
to equipment.
NOTE
• This task shows locations of hoses on the vehicle. It may not be necessary to remove all hoses at
one time.
• Tag hoses and connection points prior to removal.
• Note location of plastic cable ties prior to removal.
• Remove plastic cable ties as required.
• Inspect hoses and fittings for cracks, kinks, nicks, stripped threads, and cuts. Replace damaged
parts.
11-96
