TM 9-2320-365-20-3
12-3. WHEEL STUD REPLACEMENT (CONT)
b. Installation.
(1) Install wheel stud (1) in wheel hub (2).
NOTE
Use a nut that was removed during wheel
removal to perform step (2).
(2) Install nut (3) on wheel stud (1) with flat side of nut (3)
toward wheel hub (2).
(3) Tighten nut (3) until wheel stud (1) is seated in wheel
hub (2) as far as threads will allow.
(4) Remove nut (3) from wheel hub (2).
(5) Install nut (3) on wheel stud (1) with beveled side of nut
(3) toward wheel hub (2).
(6) Tighten nut (3) until wheel stud (1) is seated in wheel
hub (2).
(7) Remove nut (3) from wheel hub (2).
WARNING
Wheel drum weighs approximately 92 lbs
(42 kgs). Use the aid of an assistant to
help install wheel drum on axle. Failure to
comply may result in injury to personnel.
NOTE
Step (8) requires the aid of an assistant.
(8) Install wheel drum (4) on wheel hub (2).
c. Follow-On Maintenance.
(1) Uncage rear spring brakes (para 11-6).
(2) Install wheel (TM 9-2320-365-10).
End of Task.
12-6
