TM 9-2320-365-20-3
12-7. MANIFOLD VALVE ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Air tanks drained (TM 9-2320-365-10).
Kick panel removed (para 16-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Antiseize Compound (Item 63, Appendix D)
Ties, Cable, Plastic (Item 76, Appendix D)
a. Removal.
NOTE
Tag air hoses and connection points prior to
disconnecting.
(1) Disconnect connector P113 (1) from manifold valve
assembly (2).
(2) Disconnect connector P112 (3) from manifold valve
assembly (2).
(3) Disconnect three air hoses (4) from 90-degree fittings
(5).
(4) Remove four screws (6) and manifold valve assembly (2)
from cab (7).
12-16
Change 1
