TM 9-2320-365-20-3
Section II. MAINTENANCE PROCEDURES
13-2. STEERING WHEEL REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Puller Kit, Mechanical (Item 27, Appendix C)
Materials/Parts
Screw, Cap, Socket Head (2) (Item 57, Appendix
D)
a. Removal.
(1) Remove steering wheel nut cover (1) from steering
wheel (2).
(2) Remove nut (3) from steering column (4).
(3) Match mark steering wheel (2) to steering column (4).
(4) Install two screws (5) and puller on steering wheel (2).
(5) Remove steering wheel (2) from steering column (4).
(6) Remove two screws (5) and puller from steering wheel
(2).
13-2
