TM 9-2320-365-20-3
13-3. DRAG LINK REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Steering wheel turned fully left (TM 9-2320-365-
10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-600 lb-ft (Item 59, Appendix
C)
Tools and Special Tools (Cont)
Separator, Ball Joint (Item 54, Appendix B)
Wrench Set, Socket (Item 48, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Materials/Parts
Pin, Cotter (2) (Item 205, Appendix G)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
(1) Remove cotter pin (1) from drag link (2). Discard cotter
pin.
(2) Remove slotted nut (3) from drag link (2).
(3) Remove drag link (2) from pitman arm (4).
13-4
Change 1
