TM 9-2320-365-20-3
Section II. MAINTENANCE PROCEDURES
14-2. FRONT BUMPER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Blackout drive light removed (para 7-30).
Composite front light assemblies removed (para 7-33).
Gravel deflector and gravel deflector extension removed
(para 14-7).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 35, Appendix C)
Materials/Parts
Nut, Self-Locking (4) (Item 146, Appendix G)
Nut, Self-Locking (2) (Item 116, Appendix G)
Lockwasher (2) (Item 103, Appendix G)
Personnel Required
(2)
a. Removal.
WARNING
• Leave shackles installed in front bumper to
support front bumper until ready to remove.
Failure to comply may result in injury to
personnel.
• Wear appropriate eye protection when
working under vehicle due to the possibility
of falling debris.
Failure to comply may
result in injury to personnel.
(1) Deleted.
(2) Deleted.
14-2
Change 1
