TM 9-2320-365-20-4
(12) Remove rear cab support assembly (8) from spare tire
retainer (14).
NOTE
Dimension measured in step (13) should be
2.64-2.87 in. (67-73 mm). If measurement
recorded in step (13) is not within limits,
perform cab leveling valve adjustment (para
16-8) prior to installing stoneguard.
(13) Measure distance from top surface of mounting bracket
(1) to bottom edge of air spring (7).
(14) Position stoneguard (15) on air spring (7) with two
washers (16) and screws (17).
(15) Position washer (18) and screw (19) in stoneguard (15).
(16) Tighten two screws (17) and screw (19) to 48-72 lb-in.
(5-8 N · m).
Change 1
16-73