TM 9-2320-365-20-4
16-12. CAB FLOOR COVERING AND DOOR SEAL REPLACEMENT
This task covers:
a. Right Cab Floor Covering Removal
b. Right Cab Floor Covering Installation
c. Left Cab Floor Covering Removal
d. Left Cab Floor Covering Installation
e. Center Cab Floor Covering Removal
f. Center Cab Floor Covering Installation
g. Door Seal Removal (All Models Except M1081)
h. Door Seal Installation (All Models Except M1081)
i.
M1081 Door Seal Removal
j.
M1081 Door Seal Installation
k. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Seats removed (para 16-14).
Tools and Special Tools (Cont)
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 35, Appendix C)
a. Right Cab Floor Covering Removal.
(1) Remove right floor covering (1) from cab floor (2).
(2) Remove four screws (3), washers (4), and molding (5)
from cab floor (2).
b. Right Cab Floor Covering Installation.
(1) Position molding (5) on cab floor (2) with four washers
(4) and screws (3).
(2) Tighten four screws (3) to 22-26 lb-in. (2-3 N·m).
(3) Install right floor covering (1) on cab floor (2).
16-101
