TM 9-2320-365-20-4
16-11. CAB STEP REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Windshield washer reservoir and pump removed (left
side cab step) (para 18-2).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Materials/Parts
Nut, Self-Locking (10) (Item 148, Appendix G)
Grommet, Nonmetallic (Item 50, Appendix G)
Receptacle (Item 213, Appendix G)
Seal, Nonmetallic (Item 252, Appendix G)
a. Removal.
NOTE
Left and right cab steps are removed the
same way. Left cab step shown.
(1) Open cab step tread (1) on cab step (2).
(2) Remove four self-locking nuts (3), eight washers (4), and
four screws (5) from cab step (2). Discard self-locking
nuts.
(3) Remove four self-locking nuts (6), eight washers (7), four
screws (8), and cab step (2) from fender (9). Discard
self-locking nuts.
16-98