TM 9-2320-365-20-4
o. M1079 Front Splash Shield Removal.
NOTE
Right and left side splash guards are
removed the same way. Right side shown.
(1) Remove three self-locking nuts (1), brace (2), splash
guard (3), and three screws (4) from bracket (5).
Discard self-locking nuts.
(2) Remove two self-locking nuts (6), screws (7) and bracket
(5) from clamp (8). Discard self-locking nuts.
NOTE
Note position of clamps on sub-frame prior to
removal.
(3) Remove two self-locking nuts (9), clamps (10), screws
(11) and clamps (8) from sub-frame (12). Discard self-
locking nuts.
p. M1079 Front Splash Shield Installation.
NOTE
Right and left side splash guards are installed
the same way. Right side shown.
(1) Position two clamps (1) and clamps (2) on sub-frame (3)
with two screws (4) and self-locking nuts (5).
(2) Position bracket (6) on clamp (2) with two screws (7) and
self-locking nuts (8).
(3) Tighten self-locking nuts (5).
(4) Tighten self-locking nuts (8) to 26-32 lb-ft (35-43 N·m).
(5) Install splash guard (9) and brace (10) on bracket (6)
with three screws (11) and self-locking nuts (12).
Change 1
16-96.1
