TM 9-2320-365-20-4
(8) Position three screws (12), six washers (13), and three
self-locking nuts (14) in front fender (3).
(9) Tighten three self-locking nuts (14) to 18-22 lb-ft (24-30
N·m).
NOTE
Perform steps (10) and (11) on right side.
(10) Position four screws (15), eight washers (16), and four
self-locking nuts (17) in front fender (3).
(11) Tighten four self-locking nuts (17) to 18-22 lb-ft (24-30
N·m).
NOTE
Perform steps (12) through (14) on left side.
(12) Position lockwasher (18) and terminal lug TL94 (19) on
front fender (3) with washer (20), screw (21), washer
(22), and self-locking nut (23).
(13) Position three screws (24), six washers (25), and three
self-locking nuts (26) in front fender (3).
(14) Tighten self-locking nuts (23 and 26) to 18-22 lb-ft (24-30
N·m).
16-93
