TM 9-2320-365-20-4
16-19. M1079 VAN BODY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
AC power disconnected (TM 9-2320-365-10).
Batteries disconnected (para 7-48).
Heater kit removed, if equipped (para 20-41).
Air conditioner kit removed, if equipped (para 20-81).
Tools and Special Tools
Sling, Eye (4) (Item 64, Appendix B)
Link, Chain, End (Item 36, Appendix B)
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Box and Open End, Combination (Item 51.1,
Appendix C)
Materials/Parts
Rope, Fibrous (Item 53, Appendix D)
Pad, Cushioning (2) (Item 194, Appendix G)
Pad, Cushioning (2) (Item 195, Appendix G)
Personnel Required
(3)
a. Removal.
WARNING
Remove all loose equipment from van
body. Failure to comply may result in
injury to personnel or damage to
equipment.
(1) Disconnect connector P173 (1) from connector J173 (2).
NOTE
Left and right van body mounting hardware is
removed the same way. Left side shown.
(2) Remove lynch pin (3) from bolt (4).
(3) Remove slotted nut (5), washer (6), bolt (4), and washer
(7) from sub-frame (8).
Change 1
16-129
