TM 9-2320-365-20-4
NOTE
Left and Right van body mounting hardware
is installed the same way. Left side shown.
(4) Install spring (5), stud (6), two washers (7), and slotted
nuts (8) in sub-frame (2).
(5) Install two lynch pins (9) in stud (6).
(6) Install washer (10), bolt (11), washer (12), and slotted
nut (13) in sub-frame (2).
(7) Install lynch pin (14) in bolt (11).
(8) Perform steps (4) through (7) on right side of van body.
(9) Connect connector P173 (15) to connector J173 (16).
Change 1
16-133
