TM 9-2320-365-20-4
16-21. M1079 LOWER SPREADER BAR REPLACEMENT (CONT)
(6) Remove two screws (6) and chain (4) from sub-frame (7)
and spreader bar (8).
(7) Remove retaining pin (2) from spreader bar (8).
WARNING
Spreader bar weighs approximately 100
lbs (45 kgs).
Attach a suitable lifting
device prior to removal. Failure to comply
may result in injury to personnel or
damage to equipment.
NOTE
Step (8) requires the aid of an assistant.
(8) Remove spreader bar (8) from sub-frame (7).
(9) Remove pin (9) and shackle (10) from spreader bar (8).
b. Installation.
(1) Install shackle (1) on spreader bar (2) with pin (3).
(2) Apply a coating of grease to all sides of spreader bar (2).
WARNING
Spreader bar weighs approximately 100
lbs (45 kgs).
Attach a suitable lifting
device prior to installation.
Failure to
comply may result in injury to personnel
or damage to equipment.
NOTE
Step (3) requires the aid of an assistant.
(3) Install spreader bar (2) in sub-frame (4).
(4) Install retaining pin (5) in spreader bar (2).
16-140
Change 1
