TM 9-2320-365-20-4
NOTE
Perform step (3) if heater kit is installed.
(3) Remove heater exhaust pipe coupler (7) from heater (8).
(4) Remove 14 screws (9), lockwashers (10), washers (11),
and curbside front panel (12) from pod frame (5).
Discard lockwashers.
(5) Remove adhesive rubber strip (13) from curbside front
panel (12). Discard adhesive rubber strip.
(6) Remove 13 screws (14), lockwashers (15), washers (16),
and curbside top front panel (17) from pod frame (5).
Discard lockwashers.
(7) Remove adhesive rubber strip (18) from curbside top
front panel (17). Discard adhesive rubber strip.
(8) Remove five screws (19), lockwashers (20), washers
(21), and curbside top rear panel (22) from pod frame
(5). Discard lockwashers.
(9) Remove adhesive rubber strip (23) from curbside top
rear panel (22). Discard adhesive rubber strip.
16-143
