TM 9-2320-365-20-4
16-32. M1079 VENT COVER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
LH and RH doors opened (115 degrees) (TM 9-
2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Drill, Portable, Electric (Item 7, Appendix C)
Drill Set, Twist (Item 6, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Blind Rivet (Item 44, Appendix C)
Materials/Parts
Sealing Compound (Item 67, Appendix D)
Rivet (4) (Item 232, Appendix G)
Rivet (3) (Item 229, Appendix G)
Rivet (3) (Item 231, Appendix G)
Rivet (12) (frame) (Item 227, Appendix G)
Seal (Item 244, Appendix G)
Adhesive (Item 5, Appendix D)
a. Removal.
(1) Position vent cover (1) on stud base fastener (2).
(2) Latch stud base fastener (2).
WARNING
Wear appropriate eye protection when
removing rivets. Failure to comply may
result in injury to personnel.
(3) Remove four rivets (3) from vent cover (1).
(4) Unlatch stud base fastener (2).
(5) Remove vent cover (1) and spacer (4) from van body
wall (5).
16-178
Change 1
